How to STOP 0x0000007B Error Messages

The STOP 0x0000007B error will always appear on a STOP message, more commonly called a Blue Screen of Death (BSOD). One of the errors below or a combination of both errors may display on the STOP message:

 

  • “STOP: 0x0000007B”
  • “INACCESSIBLE_BOOT_DEVICE”
  • The STOP 0x0000007B error may also be abbreviated as STOP 0x7B but the full STOP code will always be what’s displayed on the blue screen STOP message.
  • If Windows is able to start after the STOP 0x7B error, you may be prompted with a Windows has recovered from an unexpected shutdown message that shows:
  • Problem Event Name: BlueScreen
  • BCCode: 7b

Cause of STOP 0x0000007B Errors

 

STOP 0x0000007B errors are caused by device driver issues (especially those related to hard drive and other storage controllers), viruses, data corruption, and sometimes even hardware failures.

 

Method A:

 

Restart your computer if you haven’t already done so. The STOP 0x0000007B blue screen error might be a fluke.

Did you just install or make a change to a hard drive controller? If so, there’s a good chance that the change you made caused the STOP 0x0000007B error.

Undo the change and test for the 0x7B blue screen error.

Depending on what changes you made, some solutions might include:

Remove or reconfigure the newly installed hard drive controller.

Startup with Last Known Good Configuration to undo related registry and driver changes.

Use System Restore to undo recent changes.

Rollback hard drive controller device driver to version prior to your driver update.

Verify that the SCSI chain is correctly terminated, assuming you’re using SCSI hard drives in your computer. Incorrect SCSI termination has been known to cause STOP 0x0000007B errors.

Method B:

 

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

How to Fix Igfxdev.dll Missing Error

What is igfxdev.dll?

 

Dynamic-link library or DLL, is Microsoft’s implementation of the shared library concept in the Microsoft Windows and OS/2 operating systems. These libraries usually have the file extension DLL, OCX (for libraries including ActiveX controls), or DRV (for legacy system drivers).

The igfxdev.dll is simply a process used by your PC to open and execute the files that are required to run software and applications. It is known to all that Windows includes a huge number of files and folders, which are the main programs that comprise Windows operating system. If you are trying to launch a program but it cannot response, that means the associated igfxdev.dll process are missing or corrupted from the Applications folder. Occasionally, Windows becomes unresponsive because more and more process like igfxdev.dll file are corrupt or are an incorrect version that is not supported by the program or feature trying to access it.

Why does Igfxdev.dll Errors occur?

 

An igfxdev.dll file should only be located in the Windows\system32 folder of your pc as this is the default path where this file is designed to execute from. Unfortunately, some of the undetected spyware may be responsible for the igfxdev.dll errors occurring on your computer by placing a file with the similar name. Moreover, an uninstall of a program that has been performed incorrectly or incompletely may also lead to the igfxdev.dll errors.

Here are the tips to fix your problem.

 

Method A:

 

SmartpcFixer can help you to fix this problem:

You can follow the instructions below to fix it manually:

Download the dll:

http://www.dllme.com/download/dll-file/c1a1bd0c6319726b5175f03288750981/igfxdev.dll

 

Save to :

c:\windows\system32

Then use SmartpcFixer to register the dll:

Please download by below url:

http://www.smartpcfixer.com/

How to re-register dll by WiseFixer:

Run SmartpcFixer, click ‘system fix’ -> activex register.

Then click’re-register’ button.

 

Method B:

 

If you couldn’t fix the problem by above solutions, you could try this one:

You can run sfc to see whether the system files are corrupted, and it will fix dll problems automatically:

How to run sfc by administrator on windows 7 /vista:

 

Go to Start / All Programs / Accessories.

Right click the Command Prompt item and select the ‘Run As Administrator’ option.

Click Continue on the UAC prompt.

In the command prompt window, type the following command.

SFC /SCANNOW

Press ENTER.

(Make sure the command is entered exactly as shown, including the space)

It will take a few minutes to run. Please do not use the computer while it is running.

After it is finished, exit any running programs and reboot the computer.

 

 

How to Fix Runtime Error R6025

When a program that is running in the Microsoft Windows operating system ends suddenly, an error report is compiled by the operating system and then a specific error message is displayed on the screen to help the user troubleshoot the problem. If you have received the message that reads “Runtime error R6025 Pure Virtual Function Call,” then the program you are using has been corrupted in some way and will need to be deleted and then re-installed.

Method A:

 

Close down the program entirely that threw the R6205 runtime error message. Press “Ctrl-Alt-Delete” and select “Start Task Manager.”

Click the “Processes” tab and click on the “Image Name” column header. Scroll down through the list of programs and check to make sure the original program that gave the error message is not on the list. Click on the name of the program if it is in the list and choose “End Process.”

Close the task manager window and click the Windows “Start” button. Select “Control Panel” and choose “Uninstall a Program” under the Programs section. Select from the list of currently installed programs the program that caused the error and click “Uninstall.

Click on the Windows “Start” button, type “cleanmgr” into the Search field and press “Enter.” Click on “Files from all users” if it asks and select “Continue.” Choose the drive where the program was installed, check the boxes next to “Temporary Internet Files,” “Temporary Files,” “Recycle Bin,” “Downloaded Program Files” and “Setup Log Files.” Click “OK” and select “Delete Files.”

Wait for the program to finish cleaning the files on your hard drive. Re-start the computer. Insert the installation CD for the program you deleted earlier or go to the website of the manufacturer and download the program again. Install the program.

Open the software program by double-clicking on its desktop icon or clicking on the name of the program in the “Start” menu under All Programs. Attempt to use the program to make sure the runtime error message does not appear again.

 

Method B:

 

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

 

How to Fix Error Message 1317

Installing a computer program can be risky business. Some computer programs may be harmful, while others unnecessarily eat up valuable resources like hard-drive space and memory. Microsoft has incorporated a series of fail-safes, such as the Error 1317 code, to prevent just anyone from installing programs to a computer. However, sometimes these fail-safes get in the way of installing much-needed software like Office or an anti-virus program. Adjusting the computer administrator preferences will tell the computer to allow installation of the program and override the error message.

Method A:

 

Open the folder containing the .exe of the program you are trying to install.

Right click on the file and select “Properties.” This will bring up a new window.

Select the “Security” tab along the top row. The screen will switch to a list of the users on the computer. Click the “Edit” button to change permissions.

Highlight the names of the users on the computer that you want to change the settings for. Click the box in the “Allow” column of the lower screen next to the row that says “Full Control.” This will provide full control of that file to those you gave permission to.

Press “Ok” to be taken back to the Security screen. Press “Ok” again to close that screen.

Run the program.

Boot into Safe Mode

Restart your computer and begin pressing F8 immediately. This will bring up a black screen that presents several boot choices. Choose “Safe Mode.” Make sure to log in as the system administrator when prompted.

Right click the .exe file from the program that you are trying to install and select “Properties.”

Select the “Security” tab and click “Edit” to change the permissions.

Select the name(s) of the users you want to adjust the permissions for and check the “Allow” box next to the “Full Control” category.

Click “OK” to return to the Security screen and press “OK” again to close the properties window.

 

Method B:

 

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

Fixing a Slow Computer Startup with a Registry Cleaner

How many minutes it will take to log on Windows? After buying a computer, installing the operating system, and then connecting to the Internet it’s time to browse around. Then you start to notice that you cannot open many content because you don’t have the right software installed. And then a lot of trouble and error message popped up and your computer slowed down. You begin downloading software programs and accessing a lot of websites. Sometimes you might add a few useless programs to the startup sequence. This enlarges the trouble and causes a slower response.

Whenever you turn your PC power on, it loads up according to your default setting. The more programs you set in your startup sequence the longer it takes them to load. If you’ve been experiencing this kind of slowdown, limit the number of programs you have in your startup sequence. It can help you maintain some speed on your computer. But for a novice to try to do this may be a daunting task.

Another method of speeding up your computer is to uninstall all programs that are causing the slowing down of your computer. One of the best ways of editing your startup sequence is to run a good registry cleaner. The best cleaners will have a program manager that performs this task safely and quickly. Inside the program manager you will find the startup manager. By opening up this section there will be an editable list of all the installed programs that will automatically begin to work once you push the power button and your startup sequence kicks in. Each individual registry cleaner might have a little different way of working but basically they all work the same.

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

 

How to Speed Up Microsoft Windows Vista

My computer is running slower and slower than before. It takes me nearly one minute to open my power point. When I click to perform a task on my computer, I simply don’t want to wait for my computer to perform that task like a snail, I want it to be instantaneous. Thus I decided to find a few methods to help speed up my Windows Vista Operating system. Here are the 3 best and simplest ways to speed up Windows Vista.

Method A:

 

Declutter Your Hard Drive

 

If your computer is a new one, you will find that it is loaded down with programs that you don’t want or need. For this reason, it is recommended to open your control panel, select Programs, then select Remove programs. Here you can delete all of the programs that you never wanted in the first place.

Once you have cleaned all of your unnecessary software, you will need to delete all the fragments of files that are left behind. Often, your control panel will not delete all of the .dll files and .exe files in all the programs. Also, you should clean the junk files in your registry.

Yet, it will take some time for your computer to find the files it’s looking for. This is one of the important reasons your computer slows down.

 

Method B:

 

Defragment Your Hard Drive

Fragmentation is the process when the computer writes data to a disk without keeping everything together in one spot. The hard drive is like a bedroom and the files are like your clothes. The clothes are scattered here and there instead of being put in the wardrobe in good order. The data of one program are not saved together, which means it takes longer for the disk to find it. Bringing all the components required to perform the task that you need is one of the causes for your computer to slow down.

 

Method C:

 

For this reason, I strongly recommend a program called SmartPCFixer.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

How to Delete Temporary Internet Files in IE

The temporary Internet files in Internet Explorer 9, sometimes we call it cache, are the copies of text, images, and other data from the websites you visited nearly that are saved on your hard disk. The cache is a component that transparently stores data so that future requests for that data can be served faster. The data which is stored in a cache might be values that have been computed earlier or duplicates of original values that are stored in other place. As for troubleshooting a problem goes, deleting temporary Internet files is helpful when a web page won’t load. Deleting the temporary Internet files in Internet Explorer is safe and useful. Bur it won’t remove other things like cookies, passwords, etc. Follow the steps below to clear the cache in Internet Explorer 9:

Method A:

 

  • Open Internet Explorer 9.
  • On the very right-hand side of the browser, click on the gear icon, also called the Tools icon, followed by Safety, and finally delete browsing history.
  • If you have the Menu bar enabled, you can instead click Tools and then delete browsing history.
  • In the Delete Browsing History window that appears, uncheck all options except the one labeled Temporary Internet Files.
  • Click the Delete button.
  • The Delete Browsing History window will disappear and you may notice your mouse icon go busy for a few moments.
  • As soon as your cursor returns to normal, consider your temporary Internet files deleted.

 

Method B:

 

  • You can run Smartpcfixer to fix it automatically.
  • Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!
  • You can download Smartpcfixer here.
  • http://www.smartpcfixer.com/
  • Just run Smartpcfixer, click ‘quick scan’
  • After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

 

 

How to Fix Windows Not Responding Problems

We need computers to work, to communicate with friends or to watch movies. Running your computer on the popular windows operating system can be very enjoyable when the system is working smoothly. However, you may wake up one morning and find your computer cannot start normally. Your windows may fail to come up as usual. If you encounter such a problem, there’s no need to panic. You can always get it fixed by following these tips below:

 

Discover the remote cause of the problem

Usually, windows may stop to respond as a result of software or hardware confliction. It can also be a result of new program installation or any other software-related problem. An anti-virus program can also cause this error. This happens when the program messes up your registry data. It can also occur when you have two different anti-virus programs running on your computer. They may freeze your windows and cause it not to turn up. Here are some tips for you.

Method A:

 

Repair Windows

Commonly, windows may fail to respond when some of its system files have been damaged. To get this fixed, you have to restore the windows installation. All you need is to restart your system and slot in the Windows installation CD. You have to reboot your system from the CD-Rom in order to get it reinstalled. You’ll then go ahead to follow the onscreen instruction to get the operating system restored. During the repair process, the old windows files will be cleaned out while fresh ones are stored and re-installed.

 

Method B:

 

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

  • You can download Smartpcfixer here.
  • http://www.smartpcfixer.com/
  • Just run Smartpcfixer, click ‘quick scan’
  • After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

 

How to Fix Wmi Errors in Vista

WMI is an important utility which was added for IT administrators to find and fix errors in the Windows operating system. WMI was first introduced in Windows 2000. If there is anything wrong with your computer, then you can rename the folder the WMI contents are in, and let Windows repair the corrupted data. This job will require use of the command prompt and may be a little difficult for a novice. Don’t worry. Just read on, and you will have your WMI back up and running in a few minutes.

Method A:

 

Hit the “Start” button and launch a command prompt with elevated privileges. In the search box Type in “Command Prompt”. When it appears right click the program and click on “Run as Administrator”.

After the prompt opened, type in “net stop winmgmt”. This will stop the WMI so we can fix it.

Navigate to “C:\Windows\System32\wbem” and right click on the folder “Repository” and rename it to something like, “Repository_bad.”

Go back to the command prompt you used earlier and type in the command, “net start winmgmt”.

Re-register the WMI by typing the following command into the command prompt, “winmgmt /salvagerepository.” This command will make Vista be able to assess the WMI folder when it can’t find it, (due to your renaming it earlier) and it will automatically fix all the errors caused by the previous WMI files by creating new WMI components.

 

Method B:

 

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/

 

 

How to Fix Appcrash Errors on a Computer

When program files or files within your computer’s registry have become corrupted, the programs might crash unexpectedly. When a program crashes, you may get an Appcrash error. The error message will say “Windows Media Player (or whichever program has crashed) has stopped working” and then list some technical information regarding the cause of the crash. Unless you are a computer programmer or a geek, you may never completely understand what has caused your program crash, but it doesn’t mean you can’t fix it.

Method A:

 

Delete any new programs that you have downloaded recently. Often, the corruption is due to a bad download that installs harmful files. If you started to get the Appcrash error on your system after downloading a new program or file from the Internet, it’s highly likely that you have downloaded a bad product or a virus. Go to Control Panel to get rid of the program immediately.

Uninstall the program which is crashing. It is hard to fix the program’s corrupted files while the program is still installed. To make sure that you’ve deleted the program files completely, it is safest to completely uninstall it from the system.

Run a full scan for your computer. Your computer should already have an antivirus program installed that can scan for virus and delete them from your system. If you do not have antivirus software in your computer, that could be very dangerous. Purchase and install antivirus software as soon as possible. Once you have the antivirus program installed, open it and click “Scan Computer.” The antivirus scan will isolate malware and you will be given the option to remove them from your system.

Reinstall the program that was crashing. Now that the corrupted files have all been removed, your program will run smoothly after reinstallation.

 

Method B:

 

You can run Smartpcfixer to fix it automatically.

Smartpcfixer is a top-ranking error-resolution registry cleaner which will fix the computer errors and optimize the system settings. You can scan, clean, optimize, and keep your PC much healthier with it!

 

You can download Smartpcfixer here.

http://www.smartpcfixer.com/

Just run Smartpcfixer, click ‘quick scan’

After the scan is completed, click ‘repair all’ button.

 

http://www.lionsea.com/